STROKOVNO SVETOVANJE
od 9. do 15. ure
Ni izdelkov
*321 261
TAir airride kit with air management by TA-Technix
Nov izdelek
LFAU13-X-LFKIT1S
4251695187989

TA-Technix airride kit with air management for Audi 100 C1
TAir airride kit with air management by TA-Technix
Vprašanje o tem izdelku pošljite lastniku trgovine.
* Obvezna polja
ali Prekliči

TA-Technix airride kit with air management for Audi 100 C1
To be informed about product update via email, fill out the form.
* Required
or Cancel
TAir airride kit with air management by TA-Technix
TA Technix Air Damper Kit + TA Technix Air Management with Air Generation Kit
The multi-function display is operated intuitively by means of a freely positionable rotary knob / potentiometer.
The electronic, pressure-based control unit has the option of storing 4 freely configurable bellows pressures / ride heights on an axle-by-axle basis.
With the help of the enclosed operating instructions and the simple menu navigation, the following additional functions, among others, can be used:
- 4 driving heights
- Adjustment of the driving height with ignition on and off (autolevel)
- Axially adjustable excess bellows pressure for optimum adjustment of the ride height
- Protection against foreign use (offers the possibility to lock the system at the desired ride height within 3 seconds)
- maximum as well as minimum tank pressure (adjustable)
- Protection of the on-board power supply through definable upper and lower limits of the on-board voltage
- freely configurable valve times
- Modification of the control unit lighting / ECU lighting
- Minimum pressure of the front and rear axle (falling below this level triggers a visual warning signal and is necessary for TÜV registration)
includes:
- Multifunctional display
- Rotary knob / potentiometer including 4 caps in black, red, blue and silver
- anti-reflective foil
- prefabricated wiring harness
- Control unit / ECU
- 3 update cables
- TA Technix 444C compressor in black
- 11,5 litre tank in black
- Electronics set including compressor relay
- Fuse holder including fuse
- 4x 2/2 way valves 1/4 with pressure sensors
- 25 metre 6mm PU hose in black
- all fittings including check valve and safety valve
- water separator
- emergency filling valves
suitable for:
Audi 100 C1 Type F104
year of construction 1970 - 08.1973
maximum front axle load: 810kg
maximum rear axle load: 810kg
Approval:
Including parts report (§19.3)
Implementation notes:
Models with torsion bar suspension
Notes:
-
Axle:
-
KeyType number:
1150,1149,6885,1147,6884
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
TAir airride kit with air management...
