Davies Craig EWP80, 12V 80LP remote electric water pump kit

The EWP80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump, the EWP can provide up to 10kW (13hp) of extra power and increased torque and is used extensively in intercooler applications.

Technical specifications:

• Operating voltage: 3V DC to 15V DC
• Maximum current: 7.5A at 13V
• Flow rate (max) 80 L/min (21.13 US gal/min) @ 13V DC
• Operating temperature: -40° to 130°C (-40° to 266°F)
• Pump design: clockwise centrifugal with volute chamber
• Pump weight: 900g
• Pump material: Nylon 66, 30% glass-filled
• Burst pressure: 350 kPa (50 psi)
• Seal: ceramic face seal
• Self Priming: No
• Fits hose size: 32mm to 51mm (1⅜” to 2”)

Combined with an LCD EWP Fan Digital Controller (Sold separately Part ID *8002) will manage both the EWP and Thermatic fan operation. The Digital Controller will vary the speed of the EWP in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic Fans will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after the engine shut down, eliminating heat soak and extending engine life.

Contents:

• 1x EWP80 Nylon 12V Assembly
• 1x Nylon Flange Adapter: 35mm 90° Elbow
• 1x Nylon Flange Adapter: 35mm Straight 1
• 2x EWP ADAPTOR O-RING 
• 2x Adaptor, rubber sleeve - 3mm 1/8"
• 2x hose clamp
• 1x EWP BASIC PUMP LOOM
• 1x RED - Wire Joiner
• 1x RED - 6mm Ring Terminal
• 1x RELAY - 12V 40 Amp 5 Pin W/- Resistor Protection
• 1x SCREW - SELF TAP 8X3/8 BZ
• 6x 5x12 Flanged Hex Set Screw Zinc Silver
• 6x 5x16 Flanged Hex Set Screw Zinc Silver
• 6x M5 FLANGE NUT ZINC SILVER