PROFI CONSULTING
from 9am to 5pm
No products
*285 433
New product
DFP5

Meguiars Soft Buff Foam Polishing Disc 5" - for DA polisher (medium), 5 inch
Meguiar's new disc system significantly simplifies and makes machine polishing more efficient. At the same time, it will make it easier for you to choose the right disc and reduce the number of accessories you need for paint renovation.The DFF5 wheel is intended for use with the MT310 Meguiar's DA polisher and other orbital polishers. This is a polishing disc intended for final polishing of lacquers to maximum shine, polishing circular scratches, holograms, orbital fog and other light to medium defects of lacquer.Use one of Meguiar's finishing polishes for the final polish, e.g. G19216 Meguiar's Ultimate Polish or professional M205 Meguiar's Ultra Finishing Polish.Pošlite obsluhe obchodu otázku k tomuto produktu.
* povinný údaj
alebo Zrušiť

Meguiars Soft Buff Foam Polishing Disc 5" - for DA polisher (medium), 5 inch
To be informed about product update via email, fill out the form.
* Required
or Cancel
The new Meguiar's Soft Buff foam discs have been completely redesigned to give you the best possible results in refinishing and body polishing.
The DFP5 disc completely replaces the older disc W8207 from the older Soft Buff 2.0 series and significantly expands the possibilities of its use. This is a polishing disc intended for final polishing of lacquers to maximum shine, polishing of holograms, orbital fog and other small defects of lacquer.
The new foam discs are specially designed for use with the DA polisher and thus improve the results achieved when working with them. At the same time, the new construction of the used foam significantly lowers the operating temperature, thus eliminating the risk of paint burning.
The special Velcro fastener that attaches the discs to the carriers was developed with an emphasis on maximum polishing efficiency. This unique system prevents unwanted loss of polishing power. Due to vibrations and perpendicular pressure on the wheel, ordinary Velcro fasteners can cause play in the connection between the driver and the wheel and thus the loss of the polishing power generated by the polisher. The result is a limited ability to correct and polish the paint.
The Velcro system, with its unique construction, ensures the strength of the connection between the driver and the disc and thus increases the efficiency of machine polishing. Thanks to the Velcro fastener, there are no unwanted clearances and the maximum amount of polishing power is transferred from the polisher to the paint surface. That's why Meguiar's uses this velcro on all their reels and drivers.
The new discs have been redesigned based on development with the world's top detailers to provide perfect performance while maintaining the ideal diameters (5" and 6") and at the same time the minimum thickness (only 17.5 mm!)
Note:
Carriers can affect the result of paint renovation as well as the used machine polisher, wheel, polishing paste or the application technique itself. If you use a low-quality carrier or a carrier with an unsuitable Velcro fastener, the result of your work may be negatively affected. It is technically possible to use wheels or drivers with regular Velcro, but for the reasons described above, we recommend that our customers always use only Meguiar's high-quality wheels and drivers, which will ensure the best possible results when correcting, polishing and waxing the paint.
The advantages of the new Soft Buff discs compared to the older versions of Meguiar's discs:
Technical parameters:
| Type | Polishing |
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
Meguiar's new disc system...
